On this page
| Club | P | Scored | Per match | Conceded | Per match | Clean sheets | No goal |
|---|---|---|---|---|---|---|---|
| FC København | 14 | 29 | 2.07 | 12 | 0.86 | 7 | 1 |
| FC Midtjylland | 14 | 29 | 2.07 | 17 | 1.21 | 2 | 0 |
| FC Nordsjælland | 14 | 26 | 1.86 | 18 | 1.29 | 5 | 2 |
| Brøndby | 14 | 23 | 1.64 | 21 | 1.50 | 3 | 3 |
| AC Horsens | 14 | 23 | 1.64 | 23 | 1.64 | 1 | 5 |
| Viborg | 14 | 22 | 1.57 | 13 | 0.93 | 5 | 3 |
| AGF | 14 | 19 | 1.36 | 21 | 1.50 | 2 | 3 |
| Lyngby | 14 | 19 | 1.36 | 29 | 2.07 | 1 | 3 |
| Sønderjyske | 14 | 19 | 1.36 | 33 | 2.36 | 2 | 5 |
| Silkeborg | 14 | 18 | 1.29 | 24 | 1.71 | 3 | 2 |
| OB | 14 | 16 | 1.14 | 19 | 1.36 | 2 | 4 |
| Randers | 14 | 14 | 1.00 | 27 | 1.93 | 3 | 5 |

Calculated by us from every played Superliga match (results: ESPN). Sorted by goals per match.
What this data actually shows
The 84 completed league games listed here produced 257 goals, averaging 3.06 per game. There were 23 draws, or 27.38% of the recorded fixtures. Each match contributes two club appearances; the standings currently total 168.
Own calculation · source snapshot: 17 November 2026
Superliga statistics: choose the measure for the question
Statistics are most useful when their question is clear. Most goals, most goals per game and the highest share of attempts converted are different measures. A team can lead one and rank lower on another without any numerical error. Begin with the question, then choose units, fixture selection and calculation rather than selecting whichever large number looks most impressive.
The displayed team figures provide the starting point. This guide explains totals, averages, percentages and model values without treating them as interchangeable. All original calculations use fictional teams and values to explain the method. Read current club figures in the dated overview.
The official Superliga statistics offers league season, team and player selections. Read each column under its own definition. Two services using the same word, such as shot or assist, are not sufficient evidence of identical underlying selections.
Decide what constitutes one observation
A match, player appearance and shot are different observations. Goals per match uses fixtures as its denominator, while conversion uses a particular selection of attempts. Switching between them changes the meaning of the figure and therefore the sporting statement it supports.
Write a comparison as a short sentence: league goals scored per completed match in the selected season. That establishes competition and denominator. Away performances after the interval would require a narrower, documented selection. The sentence should remain valid for both teams being compared.
Two club records may also include their shared meeting. That fits an analysis of each club’s perspective but not a combined count treating them as separate league events. Preserve the observation unit when adding records so teams, fixtures and events do not change roles midway.
Match season, phase and reporting period
A season label must remain with every compared value. A regular-season selection is not automatically the whole campaign, and a club record may include other competitions. Retain the Superliga, relevant phase and agreed period throughout the calculation.
One club may have completed its round fixture while another plays later. Their records need not be equally advanced. An average can expose different match counts but does not create an unplayed result in the sample. Read dates and appearances together rather than assuming a shared round heading settles both.
Use the results archive for actual completed fixtures. For the last five, identify exactly five for each club by played date. The league-wide list’s first five entries are not the same sample and may contain only one or two appearances by the club you intended to investigate.
Totals and rates can produce different leaders
In a fictional example, A scores 24 goals in twelve games and B scores 22 in ten. A has more overall, but its rate is 2.00 per match against B’s 2.20. B ranks higher when asking about production per fixture in that selection.
Show goals and games alongside the average. A rate without sample size conceals sensitivity to one observation. A total without appearances can make more playing opportunities look like greater output per opportunity. Keeping both prevents either interpretation being smuggled into the other.
No universally best team needs to be selected from these figures. State the comparison actually made. Total goals and goals per game both have useful meanings, but cannot replace each other in a conclusion without changing the claim being expressed.
Interpret conceded goals in the correct direction
For goals against, a larger figure is not automatically better. Still compare match counts. Ten conceded in five fictional games gives 2.00 per appearance, while twelve in twelve gives 1.00. The latter team has conceded more overall but fewer per match.
This does not identify which goalkeeper saved most shots. A save percentage requires saves and an appropriate shot definition. Final scores alone do not contain those details. Avoid deriving individual goalkeeper percentages solely from the team’s conceded total.
A tactical explanation needs opponents and events. Tempo, attempts and the match sequence can matter but are not established by the total alone. Describe the observed difference before proposing a cause, and separate team exposure from an assessment of one individual’s performance.
Clean sheets and clean-sheet share
A match without conceding is commonly called a clean sheet. Three among ten selected fixtures gives thirty percent as an illustration. Three is the count, ten the sample and thirty the percentage. Those values should not acquire the same label.
A team record cannot automatically be awarded to everyone present that day. For goalkeeper statistics, examine participation and the source’s attribution, particularly after a keeper substitution. A team clean sheet and an individual credit can have different conditions.
Retain the competition too. A cup clean sheet should not improve a percentage whose denominator contains only league fixtures. One incorrectly included event changes both the share and its interpretation even when that event’s own final score is accurate.
Shot volume, accuracy and conversion ask different questions
Attempts describe volume. An on-target share describes a defined accuracy measure; goals divided by selected attempts describes conversion. Decide which you are examining. The largest shot count does not automatically establish the best conversion percentage.
For an original illustration, three goals from fifteen selected attempts give twenty percent. Six attempts on target among those fifteen give forty percent. Three goals from six on-target efforts give fifty percent. All three calculations can be correct while their denominators and questions differ.
Opta’s definitions demonstrate that named provider measures can exclude particular attempts. Retain the definition with each percentage. An original illustration using all selected shots is not automatically identical to a service’s named official conversion measure, and the two should not be labelled as though they were.
Fictional example using the same selected attempts:3/15=20%,6/15=40%,3/6=50%. Changing the denominator changes the question.
Selected attempts
15
Of those, on target
6
Of those, goals
3
| Comparison | Calculation | Share |
|---|---|---|
| Goals / selected attempts | 3 ÷ 15 | 20% |
| On target / selected attempts | 6 ÷ 15 | 40% |
| Goals / attempts on target | 3 ÷ 6 | 50% |
This example uses its own selected attempts. It is not automatically identical to Opta’s named conversion measure, which has particular exclusions.
Combine numerators and denominators before a pooled percentage
Averaging percentages can give short and long selections equal weight. For overall success across events, combine the relevant numerators and denominators first. The question then concerns the proportion of all selected attempts that succeeded rather than the average of selected subgroup rates.
Imagine ten successful passes from ten attempts in one period and 45 from ninety in another. The percentages are one hundred and fifty, averaging seventy-five. Together there are 55 successes from one hundred attempts, or 55 percent. The answers use different weighting.
Do not use an ordinary average of player percentages as the team’s combined passing percentage without attempt counts. If equal-weight average player percentage is the intended question, name it as another analysis. The calculation’s label should not change after the preferred result becomes visible.
Fictional passes:pooled 55 of 100 gives 55%. Averaging 100% and 50% gives 75% under different weighting.
| Period | Successful | Attempts | Share |
|---|---|---|---|
| 1 | 10 | 10 | 100% |
| 2 | 45 | 90 | 50% |
| Combined | 55 | 100 | 55% |
Attempts weighted equally
55 ÷ 100 = 55%
Periods weighted equally
(100% + 50%) ÷ 2 = 75%
Zero, missing information and an absent denominator
Zero goals in five documented games gives a zero scoring rate. Missing appearances prevent a reliable calculation. A selection containing zero games supplies no ordinary meaningful goals-per-game division. Those are different situations even if a display leaves similar-looking fields.
A blank should therefore not automatically become zero. It can reflect coverage, a filter selecting no fixtures or unavailable information. Check source and scope before using an absent value to rank a team last or to describe a complete lack of activity.
Disclose coverage for partial records. A shot percentage covering eight of ten games concerns those eight with recorded events. It should not sit without explanation beside a ten-match goal total as though both supplied one complete season measure.
Expected goals are model values, not an additional score
Expected goals, or xG, represents a model’s assessment of shots becoming goals. Hudl StatsBomb’s explanation describes historical attempts and their characteristics as a basis. The value is not a number of real goals to add to the result.
In a fictional example, three shots receive 0.20, 0.60 and 0.10, summing to 0.90 xG. This promises neither exactly one goal nor a ninety-percent guarantee of winning. The sum concerns those shots’ model values, not a complete forecast of every possible match outcome.
Retain model and provider when comparing. Models can use different features and assign different values to the same match. Sharing the final score does not make their estimates interchangeable. A precise comparison should wait for missing model information rather than treating an unexplained xG number as an identical measurement.
Fictional model values:0.20+0.60+0.10=0.90 xG. The sum is neither an actual score nor the chance of winning.
Shot 1
0.20 xG
Shot 2
0.60 xG
Shot 3
0.10 xG
0.20 + 0.60 + 0.10 = 0.90 xG
| Shot | xG |
|---|---|
| 1 | 0.20 |
| 2 | 0.60 |
| 3 | 0.10 |
| Sum | 0.90 |
Read Hudl StatsBomb’s explanation of xG. These are fictional model values, not a record of an actual match.
Goals minus xG does not prove lasting superiority
A fictional team scoring three against 1.20 xG has a difference of plus 1.80. That describes actual goals against this model’s total in the selection. It does not establish that another 1.80 goals will be added every future game.
A short period can be heavily influenced by individual attempts. Read fixtures, shots and model alongside the difference. One strong result cannot establish systematic outperformance of every expectation. A season total and one evening require different caution.
Match penalty scope and other restrictions too. Actual non-penalty goals should not be compared without explanation with xG including penalties. Label both measures so the subtraction does not conceal a changed selection, and avoid turning a descriptive difference into an automatic prediction.
A negative difference is not necessarily a data error. One actual goal minus 1.80 xG gives minus 0.80 as an original illustration. This is a difference between two measures, not a negative count of scored goals. Retain its sign and label instead of replacing every negative value with zero.
Possession and passes do not explain victory alone
Possession percentage describes a measure of ball control under the source’s method. Passing percentage concerns selected passes. Neither equals goals, chance quality or probability of winning. Interpret a high value in its actual unit before describing what it establishes.
A team can change behaviour after leading or face an opponent with another style. Score state and the sequence therefore matter when comparing periods. Possession after taking the lead should not automatically explain how that lead arose.
Where the percentage’s basis is unclear, read the provider’s explanation. A share of passes and a share of measured time need not represent the same observation. Use one method for both sides instead of allowing a familiar label to conceal a different underlying count.
One extreme match can dominate a small sample
An original illustration with zero, one and eight goals totals nine across three games, averaging three. Its median is one. The mean is correct, but the large last observation makes it insufficient to describe how all three fixtures looked.
Inspect the distribution alongside the total. This does not mean deleting the large victory. A restricted sample excluding a fixture is another analysis requiring explanation. Otherwise selecting observations can manufacture the conclusion originally hoped for rather than testing a defined question.
Choose the period before judging the result where possible. Comparing three games with another club’s ten requires an explicit count difference. A larger sample is not automatically preferable for every question, but a small sample does not justify hiding how few observations support an impressive average.
Player measures per ninety require individual minutes
For players, team appearances cannot replace individual participation. Four goals in 720 fictional minutes give 0.50 per ninety, while two in 180 give 1.00. The second rate is higher but covers considerably less playing time.
Nor should one player’s appearances be compared with another’s starts as though they were the same denominator. Minutes, role and event definition must fit. The Superliga scoring guide treats the individual race and separates totals from rates.
Team scoring rates and personal rates are different analyses. Every team goal does not belong to the forward named on the sheet. Use personally credited events and do not allocate unknown goals or minutes according to a projected lineup, a formation diagram or a familiar positional label.
Keep percentage points and relative changes labelled
Fictional shooting accuracy increasing from forty to fifty percent rises by ten percentage points. Relative growth is ten divided by forty, or twenty-five percent. Both descriptions are usable, but cannot receive the same name without changing the meaning.
Doubling shots is not doubling conversion percentage either. The figures have different denominators and scales. Record starting value, final value and change unit when demonstrating increased production or efficiency instead of using an ambiguous claim that a statistic improved by ten.
Rounding can hide a small difference or make it appear larger. Calculate from underlying figures where available and round afterwards. Do not attach many decimals to an outcome based on a coarse percentage or unknown fixture selection.
Also establish whether a share is shown as a decimal or percentage. 0.40 and forty percent can describe the same share, whereas forty goals is a count. An unlabelled number cannot be compared solely by size. Retain percent signs, column names and denominators when moving a value into your own description.
A combined example shows why sample size matters
Imagine A with three results: 2–0, 0–1 and 1–1. B has two: 1–0 and 2–2. Both scored three and conceded two. A averages 1.00 scored per game against B’s 1.50. Conceded rates are approximately 0.67 against 1.00.
Each has one clean sheet. A’s share is one of three, approximately 33.3 percent; B’s is one of two, fifty percent. Totals alone hide the appearance difference. Saying the same defensive numbers can therefore conceal several distinct comparisons.
Choose the supported conclusion: equal total goals for and against but different rates in the displayed selections. You do not yet know who faced stronger opponents or created better chances. Those questions require evidence beyond these five final scores rather than a more confident description of the same limited sample.
Fictional comparison:A and B both have goals 3–2, but unequal match counts produce different rates.
| Team | Results | Played | Goals for | Goals against |
|---|---|---|---|---|
| A | 2–0 · 0–1 · 1–1 | 3 | 3 | 2 |
| B | 1–0 · 2–2 | 2 | 3 | 2 |
| Team | Scored per game | Conceded per game | Clean sheets | Clean-sheet share |
|---|---|---|---|---|
| A | 1.00 | 0.67 | 1 | 33.3% |
| B | 1.50 | 1.00 | 1 | 50% |
Figures begin an explanation; they do not establish its cause
A change following a coaching appointment can merit investigation without proving that the coach caused it. Opposition, home advantage, injuries and match sequence can differ too. Describe known sample differences before converting a before-and-after figure into a certain explanation.
A comparison becomes clearer with one competition, reasonably comparable periods and explicit conditions. This does not remove every difference, but exposes limitations. Without details about opponents, availability and match events, the figures cannot establish the coach’s effect on their own.
For positions and tied-point rules, use the complete standings explanation. The task here is selecting a statistical measure that answers the question. A goal rate, model estimate and league position are related but should not replace each other.
Check source and selection when values disagree
Start with season, team, period and category. Establish whether sources contain the same fixtures and definition. The DBU’s programme and results for the 2026/27 regular phase helps locate fixtures behind original calculations; it does not automatically verify every other event field.
A later correction can alter scorer, assist or event classification without changing the final result. Use the relevant source for that field. Keep review date separate from the last included match when sharing a calculation another reader should be able to reproduce.
A useful concise conclusion identifies the measure, its units and its fixtures, then explains what remains unsettled. That makes statistics helpful in a specific sporting discussion without turning uncertain details into confident predictions of the next game or allowing an unnamed sample to decide the answer.
Questions and answers
Does most goals always mean the highest scoring rate?
No. A rate uses fixture or minute exposure. Different selections can produce different leaders.
Should xG be added to the final score?
No. It is a model assessment rather than actual goals.
Should empty fields become zero?
No. Establish whether there is an observation, missing coverage or no relevant selection.
Is averaging percentages always a pooled percentage?
No. Unequal denominators require combined numerators and denominators for an overall event share.
Choose a topic and next question
Standings and form
- Danish Superliga standings overview — The complete Superliga table explained through matches played, points, goals and form.
- Superliga standings scenarios — What could the next result change?
- Superliga form standings — Form over recent matches
- The Superliga standings and qualification gaps — The gap around sixth place
- Danish Superliga standings — Points per game in the Danish Superliga
- Superliga standings and results — The result and its points impact
- Superliga results and standings analysis — Comparing an uneven table
- Danish Superliga table — Home and away profiles
Updates
- Football updates and results — Results as a route into the day’s football
- Superliga news and table developments — What do the latest numbers tell us?
Goals and statistics
- Danish Superliga Top Scorers and Stats — The goal chart, the assist chart, the leading scorers further down the pyramid and how each club scores and defends.
- Superliga goalscorers and creators — Goals and assists in the same attack
- Superliga top scorer race — Read the Superliga scoring race with season, goals and playing time from one selection.
- Superligaen scoring leaders — Reading the season scoring list
Champions and history
- Who has won the most Superliga titles — Titles since the Superliga began
- Superliga winners by season — Champions year by year
Attendances
- Superliga match attendances — Understand registered Superliga crowds, averages and stadium use.
- Average Superliga attendances — Average home attendances by club
Football leagues and rules
- Danish Football and the Superliga — Choose the right football route: the Superliga and divisions, women’s football, cups, European club competition and internationals.